贸易和建筑计算器
Brick and Block Wall Estimator
Use this brick and block wall estimator entirely in your browser.
Net wall area: 21 m² from 24 m² gross wall area.
Module area: 0.08 m² per unit including the entered mortar joint.
Base estimate: 262.5 unit-equivalents before the user-selected 5% allowance.
Calculations happen locally in your browser.
如何使用此结果? calculator
- 输入标注值并查看实时结果。
- 查看实时结果,并在需要共享时使用“复制结果”功能。
如何 calculation works
Net wall area is divided by the area of one unit plus its horizontal and vertical mortar joints, then the user-selected allowance is applied.
公式
Units = ceil(((gross wall area − openings) ÷ module area) × (1 + allowance ÷ 100)); module area = (unit length + joint) × (unit height + joint)
分步指南 calculation
- 输入标注值并查看实时结果。
- Net wall area is divided by the area of one unit plus its horizontal and vertical mortar joints, then the user-selected allowance is applied.
- 检查显示的结果,如有需要,请复制。
示例
A 10 m × 2.4 m wall with 3 m² of openings and 390 mm × 190 mm units with 10 mm joints needs about 276 units with a 5% allowance.
风险提示
Unit count from net wall area
The estimate subtracts total door and window area from the combined rectangular wall area. It divides the net area by the unit face area expanded by one horizontal and one vertical mortar joint, then applies the allowance you choose.
Check the bond and cut layout
This area estimate does not plan corner bonds, half units, returns, piers, opening bond patterns, movement joints, broken units, or supplier pack sizes. Measure each wall and verify the actual masonry bond and order with the project professional and supplier.
Not a structural wall design
The result does not select unit strength, mortar specification, reinforcement, ties, lintels, foundations, fire rating, or structural capacity. Use project drawings and qualified review for those decisions.
常见问题解答
Does this estimate account for the masonry bond?
No. It estimates units from net wall area and the entered unit dimensions and joint thickness. Bond pattern, corners, cuts, returns, and pack sizes can change the order quantity.
Does the result specify a safe wall design?
No. It estimates a material count only. Unit strength, mortar, reinforcement, ties, lintels, foundations, and structural requirements need project-specific professional design.
此工具是否会将我的输入发送到其他地方?
否。交互式计算在您的浏览器中运行,本网站不会将工具输入提交到后端。
我应该如何使用结果?
仅用于早期规划。请与相关机构和具备相应资质的专业人员核实测量结果、定义、当前本地要求和完整设计。
相关工具
计算楼梯立板数、实际立板高度、踏面数、水平距离和楼梯坡度,以便进行早期规划。
Open tool估算矩形混凝土体积(立方米和立方码),并可调整损耗。
Open tool将现有建筑和拟建建筑的占地面积与您输入的场地覆盖范围限制进行比较。
Open tool根据房间尺寸、开口、涂层和涂料覆盖率估算可涂漆墙面面积和所需涂料量(升)。
Open tool根据用户选择的损耗余量估算地板面积和瓷砖数量。
Open tool根据面积、深度和用户选择的余量估算景观材料的体积和袋数。
Open tool根据墙体面积、开口、板材尺寸和余量估算石膏板数量。
Open tool根据屋顶的上升高度和水平距离计算屋顶角度、上升高度与水平距离之比、坡长和坡度系数。
Open tool根据板材数量和尺寸估算木材体积(以板英尺为单位)。
Open tool